Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
As I have the engine out being rebuilt, can the water pump on a 1974 TR6 be rebuilt? It was not having any problems, but as the rest of the engine will be rebuilt, I wondered if one should do any bearings and seals for it?
I am away from home on a business trip and can't get to my usual references so thought I would ask the group.
The starter and alternator have been upgraded by the previous owner.
I got a fuel pump rebuild kit and intend on doing it.
Clutch and transmission have been redone as have all the ujoints.
Radiator and heater core are being boiled and rodded are required.
Distributor was rebuilt by Jeff at Advanced Distributors.
Carbs still trying to justify sending them out. They work and don't leak air. I bought rebuild kits for now.
Am I missing anything for the engine compartment?
Thanks
I am away from home on a business trip and can't get to my usual references so thought I would ask the group.
The starter and alternator have been upgraded by the previous owner.
I got a fuel pump rebuild kit and intend on doing it.
Clutch and transmission have been redone as have all the ujoints.
Radiator and heater core are being boiled and rodded are required.
Distributor was rebuilt by Jeff at Advanced Distributors.
Carbs still trying to justify sending them out. They work and don't leak air. I bought rebuild kits for now.
Am I missing anything for the engine compartment?
Thanks
