• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Want to Borrow: Rivet Squeezer

Share this page

T

ties581006

Member
Country flag
Offline
Old threads indicate the possibility of a "home-made" rivet squeezer that helps with the installation of the rear shroud. Anyone still have one that I could borrow? I wouldn't keep it long (less than a week) and would gladly pay for shipping both ways.

Thanks.

Mike T in Minnesota.
 
ties581006 said:
Old threads indicate the possibility of a "home-made" rivet squeezer that helps with the installation of the rear shroud. Anyone still have one that I could borrow? I wouldn't keep it long (less than a week) and would gladly pay for shipping both ways.

Thanks.

Mike T in Minnesota.
Click to expand...
Are you talking about a Pop Rivet tool?
I have several, three manual and a pneumatic.
 
equiprx said:
Are you talking about a Pop Rivet tool?
I have several, three manual and a pneumatic.
Click to expand...
The original rivets are solid. One way to fake the appearance of a solid rivet is to use a pop rivet and fill in the center with body filler.
 
I've got one I'll happily loan you but I have no idea what the shipping might be from 98284.
If you have access to a lathe and welder, you may be better off making one with an old C clamp.
If you want to borrow it, PM me with an address.
IMG_5822.JPG
IMG_5821.JPG
IMG_5820.JPG
 
Thanks for the responses. I have the solid rivets and would like to stay with those if possible. Thanks red75 for your offer to borrow. PM has been sent.

Mike T.
 
Not sure it applies to the solid rivets you purchased, but I had to cut the length of mine down to about 3/8ā€ to 7/16ā€ long to get them to work. They came to me about 5/8ā€ long.
 
HealeyRick said:
Make sure you paint the shroud lip black after the car is painted to be concours correct. I always wondered whether it was the same guy at the factory that painted the fan guard red that moved to the rear of the car to paint the shroud lip.
Click to expand...

I don't think the unions would let that happen. Obviously black paint and red paint are different skill sets. Need two union members to handle that, for sure.
 
HealeyRick said:
Make sure you paint the shroud lip black after the car is painted to be concours correct. I always wondered whether it was the same guy at the factory that painted the fan guard red that moved to the rear of the car to paint the shroud lip.
Click to expand...
According to the 2021 (so may not be up-to-date) Concours Guidelines: "From late BN1s, as early as cars built in 1954, and onwards, cars finished in lighter colors, particularly Healey Blue, Florida Green, Carmine Red and Ivory-White appear to have had the lip around the bottom of the rear shroud brush-painted in black."
 
BobHaskell said:
According to the 2021 (so may not be up-to-date) Concours Guidelines: "From late BN1s, as early as cars built in 1954, and onwards, cars finished in lighter colors, particularly Healey Blue, Florida Green, Carmine Red and Ivory-White appear to have had the lip around the bottom of the rear shroud brush-painted in black."
Click to expand...
Glad it is only light colors, not that my car is anywhere near concours.
 
Not sure it concours correct but I painted the lip seams under the fenders/doors satin black also. Just looks better I think.
 
Rob Glasgow said:
Not sure it concours correct but I painted the lip seams under the fenders/doors satin black also. Just looks better I think.
Click to expand...
While you are already on your knees you can paint your exhaust system with barbecue black unless you have one of those fancy stainless systems you like to show off.
 
Back
Top