• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

w00t-W00T!!!

Share this page

DrEntropy

DrEntropy

Great Pumpkin
Country flag
Offline
I have ~FOUND~ the kingpin kits I just knew I had here at th' hovel!!!

And a BONUS: TWO shiny new NOS heater control valves and a rear bearing 'n' seal!!

I'M RICH I TELL YA!!! :laugh:
 
Yup! Now there's plenty to disassemble and clean. All them shiny bits ain't goin' onto a rasty lookin' frame!!! :wink:
 
I missed something, Doc...what'cha building?
 
Same ol' MGB, Tony. Goin' thru th' front end (finally). Have now found all the bits I'd stashed over the last two decades. Even have a set of NOS front rotors for the beast.

I still need to get some poly bushings from you for it, BTW.

Can ya get the bushing inserts for the sway bar ends? The round ones in the bar itself to the vertical links.
 
Yep, I can get them....make sure those old NOS rotors aren't warped.
 
I'll set a dial indicator on 'em but they were from a dealer back in '78. I think they'll be okay. Certainly better than the plates I'll be replacing! :jester:
 
Doc,

Let us know how things go.

I am in process on my TR3 with same job.

Cheers.
 
DrEntropy said:
I have ~FOUND~ the kingpin kits I just knew I had here at th' hovel!!!

And a BONUS: TWO shiny new NOS heater control valves and a rear bearing 'n' seal!!

I'M RICH I TELL YA!!! :laugh:
Click to expand...

I've got pair of genyouwine NOS control knobs. What year are yall building?
 
Pull-handle.
 
Back
Top