Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Timd
Freshman Member
Offline
So I've got the regulator I had ordered. However it's slightly different from the one I orignally had. Yes, they both have 2 wires, but where my old regulator had yellow and green wires, and grounded on the case, the new regulator has yellow and black wires, and came with two metal links (seen in the photo).
This photo isn't of mine, its from ebay, but reflects what I have.
I tried to follow this, grounding the black, yellow to that brush, and one link to another brush, but I have an extra metal link. Note this picture is for a 3 wire reg.
So as you may guess, I don't have instructions, and spring is approaching. Anyone ever put one of these in? Help!
Thanks in advance.
This photo isn't of mine, its from ebay, but reflects what I have.
I tried to follow this, grounding the black, yellow to that brush, and one link to another brush, but I have an extra metal link. Note this picture is for a 3 wire reg.
So as you may guess, I don't have instructions, and spring is approaching. Anyone ever put one of these in? Help!
Thanks in advance.