• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Viton valve stem oil seals

Share this page

J

johnbellavance

Freshman Member
Offline
Has anyone used the viton valve stem oil seals that were advertised on Ebay awhile back and does anyone have the email address of the person that was selling them?
 
John,

Mason Racing Engines used Viton seals on my engine, but they didn't come from eBay. He won't use anything but these seals on what he builds.
 
Thanks Paul,

I think my valve guides are worn slightly. I get some smoke on start up after sitting awhile. Mine is a 72 I think it has single springs. If it is the single spring,and I have to check that I can use the bonnet type. I am trying to find a source.
 
John,

You will have to pull the head to install the new guides, so that is the time to have the machine shop (or you, because I know your machining skills) cut down the guide tops to allow for the seals to fit over the top.

I found the oil pan you wanted if you still need it.

See you at Larz for Day of Triumph!!
 
Back
Top