but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Whitephrog
Luke Skywalker
Offline
This looks like a deal for someone. Dismantled, media blasted and new metal already purchased.
https://tinyurl.com/bl4mo2
https://tinyurl.com/bl4mo2
-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Very late Bugeye
- Thread starter Whitephrog
- Start date
Share this page
Hap Waldrop
Yoda
Offline
OMG, he put POR15 on the entire body, good luck sanding that 
Trevor Jessie
Yoda
Offline
Emery paper :wink:
texas_bugeye
Jedi Knight
Offline
Wow should be fun getting a ground for the lights and such.
BugEyeBear
Jedi Trainee
Offline
There is a POR-15 Solvent available, but I'd think you'd have to be careful not to spill it on places you'd want to keep protected.
Not really sure how well it works on fully cured POR-15...
(POR-15 website says: <span style="font-style: italic">Clean up mixing and application equipment immediately after use. Tools should be cleaned after work but before the paint hardens using a urethane thinner. Cleaning is not possible after hardening. Observe all fire and health precautions when handling or storing solvents. Use POR-15 Solvent or POR-Strip for cleanup.)</span>
SO doesn't sound like the solvent would be very effective on a fully cured coat...
Pretty nasty stuff. So you'd have to protect eyes. skin, & use in a well ventilated area.
Probably pretty expensive too (especially in large quantities).
HOPEFULLY the shop that applied the POR-15 did something to thin it out 1st on the outer panels... (MIGHT be easier to remove if a thinner coat was applied)
-Bear-
Not really sure how well it works on fully cured POR-15...
(POR-15 website says: <span style="font-style: italic">Clean up mixing and application equipment immediately after use. Tools should be cleaned after work but before the paint hardens using a urethane thinner. Cleaning is not possible after hardening. Observe all fire and health precautions when handling or storing solvents. Use POR-15 Solvent or POR-Strip for cleanup.)</span>
SO doesn't sound like the solvent would be very effective on a fully cured coat...
Pretty nasty stuff. So you'd have to protect eyes. skin, & use in a well ventilated area.
Probably pretty expensive too (especially in large quantities).
HOPEFULLY the shop that applied the POR-15 did something to thin it out 1st on the outer panels... (MIGHT be easier to remove if a thinner coat was applied)
-Bear-