-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Vacuum Advance Pipe
- Thread starter barnman
- Start date
Share this page
Re: Vacuum advance pipe
Routing is different depending on model. Please specify. On a BJ-7 there's a vacuum hose that attaches copper pipe to rear carb, then it routes around backside of cylinder head above heater tap then on to distributor where is screws into the vac advance canister by olive and nut.
Routing is different depending on model. Please specify. On a BJ-7 there's a vacuum hose that attaches copper pipe to rear carb, then it routes around backside of cylinder head above heater tap then on to distributor where is screws into the vac advance canister by olive and nut.