• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Upholstery panels templates 100 6

Share this page

S

Stuart1006

Member
Offline
Hi: I need templates for the upholstery panels (door panels, rear of cockpit panels etc.)for 1958 100 6. PO removed them and I would like to make them myself. Any help? Thank you very much.

Stuart
 
Which model? BN4 four seater or BN6 2 seater?
 
Stuart - what is the vin # so we can help to identify if it is the early Longridge or the later style.
best of Luck -
Jim :driving:
 
Anderson and Moment claim the last Longbridge built BN4 was 54285 in December of 57. They also maintain different BN4 rear quarter panels were installed starting with 67273 in September of 58. So it appears to me that you have one of the early Abingdon built BN4s which were still paneled like the Longbridge BN4s.
 
Hi guys:

"Anderson and Moment claim the last Longbridge built BN4 was 54285 in December of 57"

So I understand mine is an early Abingdon.

Stuart
 
The first cars built at Abingdon used the Longbridge model rear upholstery. :wall:
 
Guys,
It isn't all that complicated really.
The earlier BN4 trim was of course in the Longbridge built cars and carried on with the same interior design when moved to Abingdon until about 1st April 1958.
At that time the all new 2 seater BN6 began production and the Longbridge "style" BN4 stopped production completely.
When BN4 production resumed in September '58 they introduced the later "Abingdon" style trim panels and seat assemblies with completely different rear quarter trims.
 
Stuart1006 said:
Hi: I need templates for the upholstery panels (door panels, rear of cockpit panels etc.)for 1958 100 6. PO removed them and I would like to make them myself. Any help? Thank you very much.

Stuart
Click to expand...

This was my original question!
 
If I had your model I would send you a tracing. Surely SOMEONE out there must have a template for Stuart.
 
Hi guys:
It seems that at this time nobody has the upholstery pannels templates I need. So, in case that in the future somebody can help me, I would like to summarize: I need templates to make the upholstery panels (door panels, rear of cockpit panels etc.)for a 1958 Austin Healey 100/6, Longbridge type.

Thanks a lot to all of you.

Best wishes,

Stuart
 
Back
Top