Bret
Yoda
Offline
See my last post today!
Ok I’m a little confused.
I’m trying to install a duel points Mallory distributor, but for the life of me I can’t get it to work. First thing I noticed is that the rotor is pointing about 30 degrees off from where the old unit was when I pulled it so I think the guy who drilled the hole for the drive dog is the reason for this. Other than that everything looks as it should – but still it won’t kick over.
Next I realigned the engine with both the valves closed and that the crankshaft pulley was at TDC. Confirming the location of the rotor at this point & re-checking my wires I still had no luck. Not even so much as a sputter or even a hint of trying to kick over.
So I got to thinking – I’m installing a points dizzy doesn’t its body have to be grounded in order for it to work? I mean the electronic ignition got it’s power from the positive & negative of the coil. Now I now the dizzy should be grounded by contact with the engine block but if it’s loose it’s not really the best connection.
Any thoughts?
Ok I’m a little confused.
I’m trying to install a duel points Mallory distributor, but for the life of me I can’t get it to work. First thing I noticed is that the rotor is pointing about 30 degrees off from where the old unit was when I pulled it so I think the guy who drilled the hole for the drive dog is the reason for this. Other than that everything looks as it should – but still it won’t kick over.
Next I realigned the engine with both the valves closed and that the crankshaft pulley was at TDC. Confirming the location of the rotor at this point & re-checking my wires I still had no luck. Not even so much as a sputter or even a hint of trying to kick over.
So I got to thinking – I’m installing a points dizzy doesn’t its body have to be grounded in order for it to work? I mean the electronic ignition got it’s power from the positive & negative of the coil. Now I now the dizzy should be grounded by contact with the engine block but if it’s loose it’s not really the best connection.
Any thoughts?
Hi Guest!
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
