• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Unknown Bracket

Share this page

J

JJS

Member
Country flag
Offline
Hi All,

I have a 1960 BN7. There is a bracket located behind the driver where the fuel pump is located. I didn't have the original fuel pump when I acquired the car. So I'm not sure how this bracket works, or even if it is for the fuel pump. The following photo shows the bracket. Can anyone send me a photo showing the correct installation? The bracket has three holes.

IMG_0047.JPG


Thanks!
 
I don't have a photo, but basically there is simply an L bracket that goes there, which then holds the LCS style SU fuel pump sideways underneath the LH rear seat.
 
This bracket is for the square body fuel pump and is unique to the six cylinder two seaters. The upper two holes were probably for the aftermarket pump previously installed. The two vertical center holes should line up exactly to the mounting holes of the square body pump. The bracket itself is the exact width of the square body pump. I do not have that car anymore so I cannot send any pictures, sorry.
 
Thanks for all of the responses. If anyone with a '60 BN7 has a photo I would be pleasd, but a simple L bracket will be easy to put together.

Joe
1960 BN7
 
Back
Top