-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
TR4/4A Underhood/Bonnet insulation...Yes...No ?
- Thread starter malbaby
- Start date
Share this page
Geo Hahn
Yoda
Offline
I never felt the need. Are you thinking of controlling heat? or noise?
I think I want the heat to release rather than be held in (which is why some cars have louvers). Good paint should not be affected by heat.
The noise (engine, notably valves) is part of the experience for me. The bonnet itself should not rattle if all the rubber bumps are in place and adjusted.
The only advantage I can see (in retrospect) is that it might have reduced the damage when a fan blade let go and tried to exit the engine bay upward.
I think I want the heat to release rather than be held in (which is why some cars have louvers). Good paint should not be affected by heat.
The noise (engine, notably valves) is part of the experience for me. The bonnet itself should not rattle if all the rubber bumps are in place and adjusted.
The only advantage I can see (in retrospect) is that it might have reduced the damage when a fan blade let go and tried to exit the engine bay upward.
Offline
True enough, but I might question whether that applies to clearcoat. Tom
