Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Hey Guest! British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
**Upgrade Now** (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
OK, quite a question here: how do you tell a left side of the car hub from the right side hub? Same question for the rear hubs? I sure hope I got the rears ones on correctly. :crazy:
If my memory is still with me, I seem to recall that you want the direction of the spinner when it is tightening in the same direction as the rotation of the wheel when the car is moving forward. This way, the natural tendency is for the spinner to self tighten rather than loosen. Or something like that.... I am sure others will respond....
As you're facing towards the front of the car the spinners on the hubs on the r/h side will turn in a clockwise direction to remove. The spinners on the l/h side will turn in a counter clockwise direction to remove. If they are otherwise setup, you risk losing a wheel as they will loosen and the spinner eventually fall off.
Was parked in the lot of a local quik-rip a few years ago, come out of th' place and see a father and son team beside the car. Da pointing to th' hub on th' Plus-2 says to Junior: "Them things is dangerous. They come loose and kill folk."
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.