• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A Triumph TR3A 1st gear hub

Share this page

K

Kev888

Freshman Member
Offline
I have two first gear hubs and I’m not sure which one is correct for my triumph TR3A see photos . It appears that the inner hubs are the same, but the outer hubs have some differences.
 

Attachments

  • IMG_4104.jpeg
    IMG_4104.jpeg
    576.8 KB · Views: 138
  • IMG_4105.jpeg
    IMG_4105.jpeg
    513.3 KB · Views: 132
Should I assume that the interlock goes in the machined spline left photo and the spring and ball assemblies align with the right photo an interlock
 
I would suggest going by "feel" assemble with balls/springs and use the one that works best,
as it clicks in and out of neutral position. Inspect the balls for chipping too.
Mad dog
 
I do not think it makes any differance what one you use. I would deinatly replace the ball and springs on second gear becuase they keep it from popping out of second.
Steve
 
Back
Top