• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TRF Gear Reduction Starters

Share this page

TRMark

TRMark

Jedi Knight
Country flag
Offline
TRF Gear Reduction Starters

martx-5 said:
A good trick for holding a nut on a wrench that has always worked for me is to get a small piece of paper and double it over to fit on the opening of a box wrench. Then push the nut, with the paper into the wrench. If you have too much paper hanging out, just trim or tear off the excess. It will hold the nut very nicely while you finesse it into position. If the nut seems loose in the box wrench, just add another layer of paper.
Click to expand...

Just saw this today at Griots, a magnetic finger glove.

50558_LG.jpg
 
Re: TRF Gear Reduction Starters

TRMark said:
martx-5 said:
A good trick for holding a nut on a wrench that has always worked for me is to get a small piece of paper and double it over to fit on the opening of a box wrench. Then push the nut, with the paper into the wrench. If you have too much paper hanging out, just trim or tear off the excess. It will hold the nut very nicely while you finesse it into position. If the nut seems loose in the box wrench, just add another layer of paper.
Click to expand...

Just saw this today at Griots, a magnetic finger glove.

50558_LG.jpg
Click to expand...

That is brilliant, Mark! I'm gonna try to move this to the "Tools" Forum. If not successful, please post it there.

Mickey
 
Back
Top