Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Hey Guest! British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
**Upgrade Now** (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
shift it while the covers off
to see if it moves freely...
also turn one side of the shaft
while holding the other end
while in/out of gear
to see if anything locks/slips etc.....z
Unfortunately the most common problem with the Spridget transmissions is the whining in first/reverse and when you take the side-cover off you can't see the teeth on the first-gear slider and thus you can't tell if it will whine. Even if it is noisy it will continue to run for a long time before giving you trouble.
As Zimmy says if it shifts freely, etc then go for it.
Bill
If it's out as you say, don't forget to "jiggle" the input and output shafts to check for play and check how smoothly they turn/spin through each gear! :wink:
If there are problems with individual gears you may be able to "feel them click" or jam up as you turn the tranny. Then look into the side-cover for a visual inspection.
I think your right Jack, they are square cut and should whine-- I hope one wouldn't be too worried about buying a Spridget with a first gear whine. Race cars that utilize square-cut gears whine like crazy! Enough to make you go crazy!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.