Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Tore down my '74 Triumph TR6 transmission and found the wrong countershaft; it is too small in diameter and too short for my TR6 transmission. Can someone out there tell me what car this countershaft is for?
Countershaft in question is about 0.788 inches in diameter and 8 13/16 inches in length with a cutout about 1/4 inch long in one end. Diameter of countershaft at cutout end is about 0.657 inches from flat to edge opposite the flat. Has a hole in end with the flat that extends to hole near middle of countershaft and intersects two holes opposite each other at the end with the flat. Hole in other end of the countershaft ends about 3/8 inch in.
I have attached photos of the countershaft in the hopes that between the description and the photos someone will know what car it fits.
Thanks,
Dan
Countershaft in question is about 0.788 inches in diameter and 8 13/16 inches in length with a cutout about 1/4 inch long in one end. Diameter of countershaft at cutout end is about 0.657 inches from flat to edge opposite the flat. Has a hole in end with the flat that extends to hole near middle of countershaft and intersects two holes opposite each other at the end with the flat. Hole in other end of the countershaft ends about 3/8 inch in.
I have attached photos of the countershaft in the hopes that between the description and the photos someone will know what car it fits.
Thanks,
Dan
