-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
TR2/3/3A Traffic at or and horn button not working
- Thread starter DennisT
- Start date
Share this page
Hello Dennis
There are 4 wires that go up to the horn and traciator switch. One is Black and Brown. That is the horn wire. Try using a jumper to grounding it at the connector on the inner wing wall. If the horn blows the problem is possible in the wiring inside the tube inside the steering column or the horn button. The wire bundle inside the column can get twisted up and may have pulled lose inside the head.
Do you have a wiring diagram?
David
There are 4 wires that go up to the horn and traciator switch. One is Black and Brown. That is the horn wire. Try using a jumper to grounding it at the connector on the inner wing wall. If the horn blows the problem is possible in the wiring inside the tube inside the steering column or the horn button. The wire bundle inside the column can get twisted up and may have pulled lose inside the head.
Do you have a wiring diagram?
David
I will test it over the weekend and see how I make out, I may have pulled a wire because I think some of those little setscrews that keep the hub from turning became loose