Wedge TR8 Manual - PDF?

[GBRandy]

Does the TR8 Repair Manual (the red one) exist as a downloadable PDF?

I have one and was considering building a PDF of it....but that exists why duplicate the effort?

Anyone know?

Thanks,

Randy

 

[DNK]

You want one?

 

[GBRandy]

NO.

I posted all of that for Shoots & Giggles!

Got one?

rstess at TDS dot NET

 

[DNK]

Hey, that's not the email I have for you

 

[DNK]

Coming by way of "you send it"

 

[TR3driver]

I'd like one too, Don. Probably won't fit through my email though (I think my ISP imposes a 10Mb limit). Any chance you could break it up, or post on a FTP site, or maybe on Google Docs ?

 

[GBRandy]

It should fit through my email... I'll post it out on the net with a link later tomorrow.

Thanks Don! You are alright.

 

[DNK]

Randall, on it's way

 

[TR3driver]

Got it. Thanks Don!

Acrobat complains that the index file (TR8 ROM.PDX) is missing, but that's no big deal, and I am NOT complaining.

 

[Brosky]

I'd like one also, Don!!!!

 

[DNK]

K, Paul

 

[GBRandy]

THANKS DON! ...and the supplement. Very nice.

 

[DNK]

I have 2 copies of the book. One in my office that is completely falling apart. And one in my shop basically brand new. The beaten one I had planned to PDF until I found the list and got the digital copy from someone there. The good copy is to nice to use so I end up using the diggy and coping pages.

 

[GBRandy]

Mine is pretty much destroyed. But fully functional. I was going to have Kinkos scan it and print a second copy as a back up.

I installed a computer in my garage this spring. Having the manual digitally helps a ton.

Thanks again.

 

[Darrell_Walker]

My 4A came with a "three volume" Haynes manual (the Haynes manual with the spine ripped in two places). I since have acquired a new Haynes, a factory reprint and an original factory manual (in the three ring binder).

The original Haynes still gets used the most, and the only one that gets used while working on the car!

The PDFs are nice, too. I print pages for areas I'm going to work on. I also have a couple of copies of the torque values around the garage.

 

[DNK]

Don't know if Kinko's will scan it.

 

[GBRandy]

Don't know if Kinko's will scan it.

They do put up a stink at times. But I scanned the Ferrari 355 wiring diagrams while in Chicago. These were full 24" x 24" fold outs....quite the process.

I also printed a copy of the manuals once downloaded despite an initial protest.

I suspect I could get them to scan and print the TR8 manual once I explained that it is 31 years old and no longer available...personal, one-off, consumption seems to be a key for them.

 

[DNK]

If at all cost....lie

 

[Got_All_4]

I have a friend with a Tr8 that's going blind. He's been using his big screen TV as a monitor for his computer. The Text is large enough on the TV that he can see it. I've also been looking for a 8 for myself. What's it take to get a copy?

 

[fastseven]

Hi Folks new to the forum. I just picked up a 1980 TR8 DHC. Going to licence the car and drive it for the rest of the summer then tear it down this winter. I am looking for a pdf shop manual. I do apologize for the "me too" Can any one help me out? Thanks