• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Wedge tr7 project car

Share this page

philman

philman

Jedi Knight
Offline
one of the local auto repair/car dealers in eugene oregon has a 1976 tr7 "project" for sale for $275. Advert says it has a Buick V6 engine. haven't looked at the vehicle yet. price sounds ok for a parts car.
 
Hey Philman,
Your signature says you have a TR8 with multiport injection. Is this the standard Federal Specification Lucas unit with the 4CU ECU or do you have a different setup?
Just curious if you have put on modifications or stock.
cheers.gif
thirsty.gif
 
using a ecu out of a bareeta with a custom chip burned. using the intake manifold of a '92 range rover on a buick block. not quite finished with it yet, will keep you posted with details.
 
Ok philman, you picqued my curiosity. Why the ECM out of a Chevy Beretta?

[ 03-28-2004: Message edited by: Izual Angel ]</p>
 
cheap, eeprom burning programs are already written for this ecu. i don't think the stock rover ecu can make use of a nice cam, pistons, higher volume injectors and it would be more difficult to burn a new chip.
 
Back
Top