TR6 tr6 wheelstuds

[jussie]

planning on running wheel spacers on my tr6, so i need longer wheelstuds. i already have really expensive lugnuts that fit the factory wheel studs, does anyone know the dimensions of the stock studs? mostly i need the knurled diameter and the knurled length. i'd take the studs out and measure them, but then i couldent drive the car (is my only car). also, a part number for wheelstuds that would fit my critera would be fantastic!

please help!

 

[DNK]

Don't the biggies sell them?

 

[jussie]

i only see them in stock length.

 

[DNK]

I know a couple of people run them Stay tuned ,they'll pop on.

Not familiar with Crownsville

 

[DougF]

Dorman 610-114 measures 7/16"-20x1 21/32". I had to trim a little off with 1/4" spacers.
You will have to bore the holes to 9/16".
The actual knurl length is about 7/32". The base of the head to the top of the threads is about 7/16".
I used these on the fronts. I haven't done anything to the rear yet.

 

[kodanja]

When I converted my wheels to wires, I needed to get the shorter studs so they wouldnt rub against the inner housing of the rim.
They sell them at VB.

 

[jussie]

thanks DougF, thats exactly what i needed :laugh:

kodanja, I need longer wheel studs, not shorter. lulz.

 

[kodanja]

ahhh!