-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
TR6 TR6 wheels fit a TR4A?
- Thread starter bwurgler
- Start date
Share this page
NickMorgan
Jedi Knight
Offline
Yes, they are a little wider, though. The UK spec TR6 wheels are half and inch wider, but I think the USA spec wheels are one inch wider.
Terry_Geiger
Senior Member
Offline
Bear in mind that a straight TR6 wheel is hard to find. Make sure the wheels you have are straight and true before you bother with them.
You could probably ship via Greyhound, very inexpensive!
A BCF member sold me a set here in Canada (Vancouver to Edmonton) I think that the boxed (4) shipping costs were under $50.00 in total.
I then stripped and neutralized them and took them to a high end wheel shop and had them re-trued on a lathe
Yeowch! was that expensive!
The shop here in Edmonton where I store and service my 4A painted then painted and finished installation with a marvy POR 15 silver
They now look great!
A BCF member sold me a set here in Canada (Vancouver to Edmonton) I think that the boxed (4) shipping costs were under $50.00 in total.
I then stripped and neutralized them and took them to a high end wheel shop and had them re-trued on a lathe
Yeowch! was that expensive!
The shop here in Edmonton where I store and service my 4A painted then painted and finished installation with a marvy POR 15 silver
They now look great!
TR6oldtimer
Darth Vader
Offline
<div class="ubbcode-block"><div class="ubbcode-header">Quote:]: Why would you want to put TR6 wheels on a TR4 anyway?
[/QUOTE]
One of the first things I did in 1966 to my TR4 was to widen the rims an inch or so and ran Dunlap's. What a difference. I suppose if I still had that four, and a limited budget, TR6 wheels would seem a good choice.
[/QUOTE]
One of the first things I did in 1966 to my TR4 was to widen the rims an inch or so and ran Dunlap's. What a difference. I suppose if I still had that four, and a limited budget, TR6 wheels would seem a good choice.