• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
  • When posting a classified ad, you MUST select a prefix from the drop-down next to the subject line. If you don't you will get an error and your ad will not be posted!
Tips
Tips

TR6 TR6 Turn Signal Cam misaligned

Share this page

H

Herald63nut

Senior Member
Offline
Gents
My '72 TR6 turn signal cam is misaligned, or rather the steering column is off. I am not sure how to go about realigning the steering so that the turn signal cam does its job post-signaling and completing the turn. Thanks for the help.
 
Nut,

not sure if this helps, but bobby d has some good pics on his website of the steering column and the cancelling clip.

https://tr6.danielsonfamily.org/SteeringColumn.htm

You might be able to check and see if you cancelling clip has moved or is not set up properly.

Cheers,
M. Pied Lourd
 
Herald, take the steering wheel off to check for alignment. If you need to move the shaft to get the tab centered. take the shaft loose at the bottom "U" joint, next to the rack, and move into place. It's just a crimp connection and should slide out of the way with a little help from a flat punch.

Wayne
 
Back
Top