Hey there Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
TR6BobNF
Jedi Hopeful
Offline
I posted this on my "home" forum and thought it important enough to share with BCF members:
In the interests of the safety of all TR IRS drivers I thought I'd share this one. I have my trailing arms out for bushing replacement and was doing a general cleanup and repaint of the TA's, shocks and springs before the reinstall. I was going to skip cleaning and painting the trailing arm brackets because they are not visible but they were so grungy I thought, "why not" in the interests of having nice, clean stuff to work with. The left inner, 3-notch bracket was cracked from the bottom of the bracket, through the bottom bolt hole up to the top bolt hole and the crack was right through, front to back. I did not want to weld it so I ordered a new one last night to arrive in a week or two. While it "may not" have caused a catastrophic failure at city speeds it could have gotten interesting if it broke in half on the highway. I would not have noticed this if I had not decided to clean and paint the brackets and all the accumulated grunge completely covered up the damage until I hit it with the wire wheel on my drill. If you rebush your TA's, or have them out for any reason, please inspect the brackets.
Cheers,
In the interests of the safety of all TR IRS drivers I thought I'd share this one. I have my trailing arms out for bushing replacement and was doing a general cleanup and repaint of the TA's, shocks and springs before the reinstall. I was going to skip cleaning and painting the trailing arm brackets because they are not visible but they were so grungy I thought, "why not" in the interests of having nice, clean stuff to work with. The left inner, 3-notch bracket was cracked from the bottom of the bracket, through the bottom bolt hole up to the top bolt hole and the crack was right through, front to back. I did not want to weld it so I ordered a new one last night to arrive in a week or two. While it "may not" have caused a catastrophic failure at city speeds it could have gotten interesting if it broke in half on the highway. I would not have noticed this if I had not decided to clean and paint the brackets and all the accumulated grunge completely covered up the damage until I hit it with the wire wheel on my drill. If you rebush your TA's, or have them out for any reason, please inspect the brackets.
Cheers,
A friendly reminder - be careful what links you click on here. If a link is posted by someone you don't know, or the URL looks fishy, DON'T CLICK. Spammers sometimes post links that lead to sites that can infect your computer, so be mindful what you click.