-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
TR6 TR6 tire pressure
- Thread starter sundown
- Start date
Share this page
Offline
I don't know the correct answer either, I am still getting to know my IRS car's handling after running many LBC's with solid axles and leaf springs for years. Are you looking for handling or a smooth ride? I would run about 28 all around for general tooling around in comfort, and maybe more like 32 psi if you like to whip it around the corners a lot. I am not really sure what is best front to rear.
Geo Hahn
Yoda
Offline
As one might conclude from the above -- no one right answer. I can tolerate a harsh ride for the handling I prefer so I tend to go pretty high on the pressure with the rear tires usually about 2 lbs higher than the front.
Maybe start at 32psi and see how it drives, then go up or down from there. I know of no reason why you cannot go as high as you like so long as you do not exceed the pressure shown on the sidewall.
Maybe start at 32psi and see how it drives, then go up or down from there. I know of no reason why you cannot go as high as you like so long as you do not exceed the pressure shown on the sidewall.