• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR6 TR6 steering wheel refitting

Share this page

I

ichthos

Darth Vader
Country flag
Offline
Hello,
I have a 69 TR6, and finally got around to repainting and covering my steering wheel. Can someone offer suggestions on how to put the horn button, surround, and round metal plate back on? I am especially interested in the order in which they go together. The horn surround is not replaceable, is old, and I am nervous about forcing things. Thanks in advance for any help.
Kevin
 
If the 69 is the same as the later cars wheels which I think they are it's a simple process. Install the metal retaining ring in the hub with a small hammer with light tapping. Then install the horn contact in the hub with the carbon touching the horn button contact, then push the horn button in with your fingers pushing on the outer edges. Then put on the rubber horn surround.
 
Thanks Keith, you were very helpful. Had to do a little fitting with the horn button, but got it back together.
 
Back
Top