• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

TR6 TR6 spring pan/wishbone arm help

Share this page

I

ichthos

Darth Vader
Offline
I am following Tinster's article on the front end rebuild. Is there some reason why I can't just bolt the wishbone arms to the spring pan first, attach the pivit brackets, and then just bolt the brackets in place?

Thanks, Kevin
 
:confuse: :confuse: How are you going to get the spring in??

The pan is removable so you can get the spring in and out. Please don't tell me you're going to have the spring captured in there while you jack up the lower "A" arm and try to bolt it in place!!! :eeek:
 
In a word, YES.
 
Back
Top