• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR6 TR6 Seats Rebuild

Share this page

7

75tr6

Freshman Member
Offline
I have 75 TR6-tan interior in fantastic shape however ravages of time have caused foam in seats and especially headrests to discintegrate. Vinyl is too good to replace so I just need foam/interior parts. Headrests are ablown in foam and seat lumbars are in desperate need also. Any help out there?
 
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by 75tr6:
I have 75 TR6-tan interior in fantastic shape however ravages of time have caused foam in seats and especially headrests to discintegrate. Vinyl is too good to replace so I just need foam/interior parts. Headrests are ablown in foam and seat lumbars are in desperate need also. Any help out there?<hr></blockquote>

Try

Victoria British for the major foam bits, then any competent upholstery shop to do the work.

Basil
 
The foam pieces are available from most all the usuall suppliers. I did my seats myself. It is not difficult. Do one at a time so you have a "pattern" to follow. U will appreciate the seats more if u do it yourself.
Rickc
 
Back
Top