• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR6 TR6 Seats Rebuild

Share this page

7

75tr6

Freshman Member
Offline
I have 75 TR6-tan interior in fantastic shape however ravages of time have caused foam in seats and especially headrests to discintegrate. Vinyl is too good to replace so I just need foam/interior parts. Headrests are ablown in foam and seat lumbars are in desperate need also. Any help out there?
 
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by 75tr6:
I have 75 TR6-tan interior in fantastic shape however ravages of time have caused foam in seats and especially headrests to discintegrate. Vinyl is too good to replace so I just need foam/interior parts. Headrests are ablown in foam and seat lumbars are in desperate need also. Any help out there?<hr></blockquote>

Try

Victoria British for the major foam bits, then any competent upholstery shop to do the work.

Basil
 
The foam pieces are available from most all the usuall suppliers. I did my seats myself. It is not difficult. Do one at a time so you have a "pattern" to follow. U will appreciate the seats more if u do it yourself.
Rickc
 
Back
Top