• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

TR6 TR6 rear brakes--quick question

Share this page

S

stob62

Member
Offline
I'm rebuilding my rear brakes (grinding drums, new shoes, etc.) and the linkage from the emer. brake cable to the shoes was covered in years of crud. I've sanded them clean and they are now shiny bare metal.

Do I need to paint them. Thanks.
 
I powdercoated mine. Paint is fine too - they're steel and will rust if you don't coat them with something. Also use a smear of mechanical brake grease on the pivots if you have any.
 
Thanks, that was my thinking also. Guess I was hoping someone would say it's a bad idea so I could take the lazy way out. Paint it is.
 
Back
Top