• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR6 TR6 plastic glove box installation

Share this page

MrPandy

MrPandy

Senior Member
Offline
I ordered a TRF plastic glove box and the hardware kit to mount to the TRF dashboard that I've never got around to installing in my '71 TR6. I know that I probably should have gotten the paper glove box, but plastic lasts forever (that's what the environmentalists tell me, anyway).

My question - how do I attach the glove box to the dash? The hardware kit contains 6 screws and 6 "fit nuts" (their term - I've always called them "clip nuts"). Where do they go? Thanks.
 
Never mind! Now that I've actually pulled off the old homemade dash, it makes sense. I thought it somehow mounted to the back of the wood dash. Live and learn, and next time research before posting!
 
Andy- One thing I wish they would do with that new plastic cubby. Predrill the light hole.
don
 
Andy,
Another point. Intead of using screws to install the cubby
(just another thing to come aloose) I used small aluminum pop rivets. Easy to drill out if you want to remove the plastic cubby. And they don't vibrate out.


Bill
 
Back
Top