• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
  • When posting a classified ad, you MUST select a prefix from the drop-down next to the subject line. If you don't you will get an error and your ad will not be posted!
Tips
Tips

TR6 TR6 Lower Wishbone Arm Question

Share this page

CinneaghTR

CinneaghTR

Jedi Warrior
Offline
I am getting my parts together for powder coating and noticed these plastic inserts on the top of the lower wishbone arms opposite the spring pan stud. Do you guys know what these would be? The black plastic cap has some writing, but I do not have my notes with me. It says something to the effect of "3/8 UNF..."

Thanks!
 

Attachments

  • 20157.jpg
    20157.jpg
    32.4 KB · Views: 225
  • 20158.jpg
    20158.jpg
    28.4 KB · Views: 212
It's just a plug to keep water and grime out of the stud hole. I thought there was a thread recently that said these plugs were readily available from welding supply shops or some such.

Scott
 
I just took mine out and cleaned them and they are nice and shiny red. Put them back in after the powder coating.

I didn't know they were available elsewhere.
 
Back
Top