• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR6 TR6 fuel pipe nut source?

Share this page

I

ichthos

Darth Vader
Country flag
Offline
There are two nuts on my fuel pump. One accepts the 5/16" fuel pipe, and one accepts the 1/4" pipe. I could find the 5/16" inside diameter easily, but can't seem to locate the 1/4" inside diameter. Does someone have a source that I can buy a couple of these from?
Kevin
 
If you have a good, independent auto parts store nearby, might be worth checking with them. Those nuts used to be a relatively common fitting. One of my local stores used to have some in a dusty old bin, not sure if they still do.
 
If not, TRF has them. I ordered them as the same time as I ordered a new pump.

Cheers,
M. Pied Lourd
 
Kevin- Know this is a little far but they would probably have it. Olympia Tacoma Screw Products
6700 Martin Way E.
Olympia, WA 98516
Phone (360) 491-9322 Fax (360) 491-9397]

Don't for get
McMaster Carr
 
I actually go by there every once in a while. I didn't even think of them. I will check them out. Thanks.
Kevin
 
Back
Top