Just switched over to SU HS6 carbs (Paltech) on my 76 TR6.
Problem #1: on open road car will not accelerate over 55 mph (running at ~ 3000 rpm). Seems like its being starved for fuel.
Problem #2: After driving for several miles in the Texas heat the car slowly starts to sputter until it eventually stalls. After sitting several minutes it will start back up and run for a short period before repeating the cycle. When this occurs, there is no visible sign of fuel in the fuel filter.
I'm thinking that the mechanical fuel pump just cant provide the fuel required by the Paltech Su carbs.
Thinking of switching to electric fuel pump. Any help greatly appreciated.
Problem #1: on open road car will not accelerate over 55 mph (running at ~ 3000 rpm). Seems like its being starved for fuel.
Problem #2: After driving for several miles in the Texas heat the car slowly starts to sputter until it eventually stalls. After sitting several minutes it will start back up and run for a short period before repeating the cycle. When this occurs, there is no visible sign of fuel in the fuel filter.
I'm thinking that the mechanical fuel pump just cant provide the fuel required by the Paltech Su carbs.
Thinking of switching to electric fuel pump. Any help greatly appreciated.