TR6 tr6 factory hardtop pics needed

[tr6lover]

hey guys, i need pics of a factory tr6 hardtop on the underside. i need to know how the seals go in at the sides. thanks
Randy

 

[DNK]

Randy I have those pics somewhere. I looked yesterday and could not find them I'll PM you an e mail for someone who has them.
Or you could go to the 6 pack and beg :laugh:

 

[Brosky]

Or....you could look here: Brosky hardtop refinish

If these pictures don't help, let me know and I'll see if I have anymore that I can send you.

 

[sabot]

Hi Paul, do you know if the tr6 hardtop holder will work for a spitfire
hardtop?
Thanks Tom

 

[Brosky]

Tom,

I don't know. I didn't design this one and I think that it was specific to the TR6 hardtop.

 

[swift6]

I did the basic "design" work of the carrier that Paul has on his website. I literally cobbled it togther after taking like three measurements from the TR6 hardtop. After a photo was posted showing a hardtop that I was selling, many people wanted the design specs to build their own so I went out, made some measurements and did a real basic engineering drawing. That drawing is on Paul's site as well I believe. Check out the drawing/measurements and then take a tap to your Spitfire hardtop. They will probably be fairly close.

Paul made some good changes/improvements from my basic design, you might have to as well.

 

[HerronScott]

Not sure if this would work for a TR6 or Spitfire hardtop but we bought one of these for the hardtop for my wife's Thunderbird as it didn't come with the factory one (and factory ones are outrageous if you can find them).

California Car Cover hardtop carrier


Scott