TR6 TR6 Factory Hardtop Install Instructions

[bobh]

A few months ago I posted a question asking if anyone had a copy of the factory hardtop installation instructions for a TR6. No one responded. Which I took to mean that no one had them.
I purchased a copy of the instructions from a supplier. They are a simple photo copy about 3 pages in length. If anyone needs information let me know. They are not copy righted. I don't think there is any reason I couldn't type the info and send them.
BOBH

 

[2wrench]

I do not have a hard top now, but sure do wish to
obtain one. If you know of any, please let me know. Got
a '74 TR6.

However you are able to share this info, I would appreciate
placing it into my archive.

I can just imagine months to years from now --

I know somebody had the instructions, now just who was it??

You can contact me via private message. Thanks for the
offer and hope to hear from you.

Dennis

 

[Brosky]

BOB, check your PM from me.

 

[2wrench]

Bob, maybe you could just share with me whom to
contact regarding the information you've received.

I'll be happy to order and pay for the information.

Thanks.

2wrench

 

[Brosky]

This is the simple version from the Triumph repair manual. I don't think that this violates any copyrights any longer.

 

[DNK]

Gol Dang it Paul

<span style="color: #FF0000"><span style='font-size: 26pt'>HOW DO YOU POST PDFS???</span></span>

 

[bobh]

I bought a copy from one of the big 3 suppliers (in PA). Ther are a photo copy of the instructions that came with the hardtop kit from the factory.
I'll try to remember to bring them in tomorrow and fax them to Paul. He'll try to put them in a PDF.
BOBH

 

[Brosky]

You must click on "reply" to a post.

Type your message and then go down to the file manager at the bottom. Click on file manager.

Browse to the folder where your file that you want to post is located on your hard drive. Select it and choose "Add File"

When you have them all selected, choose "Done Adding Files" and "Submit"

This works for ALL files that are to be attached. I don't know of any way to make them appear as an image, unless you convert them to a .jpg file.