• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR6 TR6 Differential Rebuild question

Share this page

J

Jerryny

Freshman Member
Country flag
Offline
Morning all,

I have a 73 TR6. The differential is making a small clunking sound when its rotating The car is up on stands and both axles have been disconnected. I am wondering if anyone knows of a quality shop that rebuilds triumph differentials. I'm near Albany NY, but am willing to travel to NJ, Conn, Mass.

Thank You in advance.
Jerry
 
Thanks. There is also a place called britishmotorsltd in Ct that does engine rebuilding, transmissions and a whole host of other things.
 
Is the clunking when rotating back and forth if so it is just the gears to lose and can add add shims to set gear lash to 0.004 0.006 check in three places on gear. If the flanges slide right off then they are broken at the key way and seals are most likely bad also. There is no drain plug and you can do that at the same time on the end cover. Madflyer
 
Plus One on Quantum Mechanics, they did a great job on my TR4 rear end.

Rod
 
It clunks all while it's rotating or just when the rotating first begins ?
 
Back
Top