-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
TR6 TR6 Convertible Top
- Thread starter StuartTR6
- Start date
Share this page
Rick O.
Jedi Trainee
Offline
Stuart--Here's what I do with my canvas top:
1. Unlatch header rail
2. Detach side snaps
3. Raise top about midway
4. Detach side velcro and pull top away from frame.
5. While lowering frame, pull top away from frame so that it lies on the boot lid.
6. Place frame in fully lowered position.
7. Fold front part of top on top of frame with rear window on top. The side windows should be hanging off to the sides.
8. Lay soft cotton material (I use old white T-shirts) on the rear window.
9. Fold side windows down over T-shirts.
10. Attach boot cover.
Rick O.
72 TR6
1. Unlatch header rail
2. Detach side snaps
3. Raise top about midway
4. Detach side velcro and pull top away from frame.
5. While lowering frame, pull top away from frame so that it lies on the boot lid.
6. Place frame in fully lowered position.
7. Fold front part of top on top of frame with rear window on top. The side windows should be hanging off to the sides.
8. Lay soft cotton material (I use old white T-shirts) on the rear window.
9. Fold side windows down over T-shirts.
10. Attach boot cover.
Rick O.
72 TR6
G
Guest
Guest
Guest
Offline
I ripped (scissor cut) a brand new Robbins top on my TR6 last month by not folding properly. That is, my son did. He borrowed the car for a spin, dropped the top, and cost me 5 C-notes.
I concur, folding these babies is slow, but not worth the short cut. Cut is what you will get.
Bill
I concur, folding these babies is slow, but not worth the short cut. Cut is what you will get.
Bill
Great info on folding the top. I never thought about sliding some towels in there to protect the plastic window. I tried for the first time on my newly bought TR6 to put the top down and half of the snaps on the rear deck separated. Anyone have any fixes for this. Maybe I will just make a new post on this subject. Thanks to everyone for sharing their knowledge.
