• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR6 TR6 Carb Gasket Sealing

Share this page

T

TR6Dan

Member
Country flag
Offline
Hi,

I have a '74 TR6 with Zenith Stromberg carbs; should I install the carb bowl gasket and gaskets/spacer between carb and intake dry; or use gasket sealer?

Thanks,
Dan
 
Please...dry.
The only place I use a dressing is Hylomar M sparingly on the gasket between the 'starter box' and body of the carb..... you have to be very careful not to over do it
 
Back
Top