• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR4/4A TR4A rear wheel cylinder source

Share this page

J

jmcfly

Freshman Member
Offline
Has anyone had success locating a new LH rear wheel cylinder for the solid axle car? This is the one with two hydraulic connections.
 
The left hand wheel cylinder is the same part as the right hand cylinder. Removal of the bleed valve creates the port allowing the connection of the brake line that leads over to the right hand brake cylinder.
 
I do believe the wheel cylinders were the same from from the TR3B if not the late TR3A through the TR6.
Charley
 
Indeed you are correct. If I had looked at some of the before photos, I would have seen that. Thanks for pointing that out. Jamie
 

Attachments

  • IMG_1144.jpg
    IMG_1144.jpg
    71.1 KB · Views: 126
Back
Top