• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

TR4/4A TR4a gussets go like this?

Share this page

T

tdskip

Yoda
Offline
Looks right for a TR4A?

P1010599.jpg


P1010600.jpg


P1010604.jpg
 
Should put some extra strength to it. Have repaired several in the past few years. Have and early 6 that needs it now. Someone really butchered it up.

Marv
 
I'll take photos for you Sunday of the gussets and my Addco TR6 (7/8") front bar on my TR4A. The bar is mounted on a TR6 radiator guard.
 
The outer holes on the TR6 radiator guard are for the OEM sway mounting. The spacing on the addco brackets is wider and I had to make a new set. The bar is a 7/8" thick Addco bar made for TR6.
 

Attachments

  • 21044.jpg
    21044.jpg
    27.6 KB · Views: 133
I checked my inner fulcrum bracket gussets and yours are placed the same. I'd have a photo for you but as you see, my frame is wrapped in plastic to protect it from the unfinished tub,

Another view of the Addco:
 

Attachments

  • 21045.jpg
    21045.jpg
    22.2 KB · Views: 129
I would also suggest adding some weld along the top box edge on your brackets to give them strength (as seen in your photo #2.)

hth, more photos if needed...

-PK
 
PeterK said:
I would also suggest adding some weld along the top box edge on your brackets to give them strength (as seen in your photo #2.)

-PK
Click to expand...

<span style="font-weight: bold">Good point!</span> I missed that Peter.
 
Back
Top