Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
GlennG
Freshman Member
Offline
I'm restoring a '65 TR4A slowly. I cut out the rusty sheet metal under and behind the battery and forgot to make a note of the positions of the battery holders, which I removed with the sheet metal. I'm not sure what the correct term is for the battery holders, but they are basically stamped and folded pieces of metal welded to the firewall and battery shelf on either side of the battery. They serve as mounting places for the battery hold-down bolts. Today I found I was ready to weld the battery holders back into place, but I've managed to lose any old pieces of the shelf and firewall that would indicate placement. I can place the left side holder fairly easily, but I need a measurement to place the other holder. Would someone with an original setup please measure the distance between the battery holders for me? Thanks!
