TR4/4A TR4A 3-Point Harness

[CinneaghTR]

I upgraded to the 3-point seat belts from Moss. According to the parts manual, Triumph offered a 3-point kit (#568946). Does anyone know if that kit provided directions regarding the appropriate mounting point on the wheel well? I do not want to reinvent the wheel if I do not have to and any assistance would be greatly appreciated.

TIA,
Jeremy

 

[TR6oldtimer]

Here is a picture of the installation in a TR6. Should work for your four.
(Click to enlarge)

 

[CinneaghTR]

Thanks for your help, Ray!! That picture helps a lot.

Best,
Jeremy

 

[prb51]

Place the attaching point as high as you poss can on the wheel welland back it by a large thick washer.
You want it as high as poss so that if needed, we hope not, it will not compress your spine. Low mounted pivots cause spinal injuries as they not only pull back but down. That's why all modern cars have a very high mounting.

 

[CinneaghTR]

Can do. I plan to have the top down to check for clearance even though I plan to mount the Surrey top later on, which would give me the option of mounting the shoulder attachment even higher.

Thanks!!

 

[angelfj1]

This was prepared for TR-2, 3, 3A but may be helpful:

 

[CinneaghTR]

More great info!!! Thanks, Frank!!