Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
the one that bolts between the frames under the rad. Was the bracket the same for the 4 and 4A? Did the 4's have an extra L shaped bracket on either end? Were they both 16" long like the TR3's? What's a reasonable price to pay for one seeing as how they are Any info appreciated. Karl
-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
TR4/4A TR4 radiator protector bracket?
- Thread starter karls59tr
- Start date
Share this page
bgbassplyr
Darth Vader
Offline
Was the bracket the same for the 4 and 4A? I dont't know.
If you are needing one for a 4, it is easy to make your own, if you have a welder and a way to cut angle iron.
I used 2" angle cut at 16", filled each end with a 2" squares, then added a 2"x2" angle 1" wide welded to the end fillers and drilled for the bolts to secure it to the frame ends. Only took an hour or so to fabricate. Just remember; Beat to Fit, Paint to Match.
If you are needing one for a 4, it is easy to make your own, if you have a welder and a way to cut angle iron.
I used 2" angle cut at 16", filled each end with a 2" squares, then added a 2"x2" angle 1" wide welded to the end fillers and drilled for the bolts to secure it to the frame ends. Only took an hour or so to fabricate. Just remember; Beat to Fit, Paint to Match.
HerronScott
Darth Vader
Offline
Karl,
No the TR4 and TR4A had different radiator shields presumably due to the different frames.
TR4 208639
TR4A 213026 (306671 alternative)
Note that the TR6 one works on a TR4A and would allow you to use a TR6 front anti-roll bar (which is what I did with mine). TRF is selling the TR6 radiator shield for $140.00 so hopefully you could get a used one cheaply.
Scott
No the TR4 and TR4A had different radiator shields presumably due to the different frames.
TR4 208639
TR4A 213026 (306671 alternative)
Note that the TR6 one works on a TR4A and would allow you to use a TR6 front anti-roll bar (which is what I did with mine). TRF is selling the TR6 radiator shield for $140.00 so hopefully you could get a used one cheaply.
Scott