• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR2/3/3A tr3b center exhaust hanger

Share this page

B

bob67bgt

Jedi Knight
Offline
I have a center exhaust hanger that came with my tr3. It looks like it bolts directly to the chassis on both sides. That would not let it move with the engine and trans mounts. Am I missing something here? Should I purchase the early TR4 style that attaches to the trans mount and pitch the original piece? Thanks for any thoughts on this. Bob
 
Thanks Marv, Looking to stop engine vibrations going thru the car if possible. If they work good then no need to order a later version! Bob
 
bob67bgt said:
I have a center exhaust hanger that came with my tr3. It looks like it bolts directly to the chassis on both sides. That would not let it move with the engine and trans mounts. Am I missing something here? Should I purchase the early TR4 style that attaches to the trans mount and pitch the original piece? Thanks for any thoughts on this. Bob
Click to expand...

I installed the cruciform bracket in my post 6ok because it was the correct one.However during installation almost ordered the later hanger type.The cross mount uses small rubber bushings that made installation difficult and allows no room to adjust up or down.Might have been easier if original exhaust pipes.In my case I wanted to raise the pipe a little to better center it in the frame hole.I think it would be easier to adjust the later bracket if nessecary. If doing over I would use the later style.Tom
 
Back
Top