• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A TR3A windshield

Share this page

tinman58

tinman58

Jedi Knight
Country flag
Offline
I just recived the windshield frame back from the chrome shop and put it together last night. I got to the corner finishers and do not have the screws. Does any body have a size for this screw? Moss #314-145
 
I looked in my TR3 factory parts book, and they list the screw as YJ2182. Translated, that means it's a Parker Kalon "J" Type...sorta like a sheet metal screw without a point. It's a #10 - 1/4" long with a round slotted head. That's the best I can come up with. I have several different stanchions here, and a couple of different types finish pieces and nothing seems to make sense. I took the best two stanchions I had and left the finish pieces off. Didn't seem to make a difference.

Try to see if a short #10 sheet metal screw goes in the holes.
 
Thanks Art
I used a #10 and ground down the point works wonderful.
 
Back
Top