• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

TR2/3/3A TR3A Vaccum line for Distributor

Share this page

H

houleyh

Senior Member
Offline
Hi,

I am trying to connect a copper line from the bottom of the front carb. What is the thread size? 1/8 BSPP?

Where can I get such a connector?

Thanks
 
I don't know the thread size offhand, but ISTR it was a Whitworth thread.

Both Moss & TRF have the union listed as available, although you should probably be sitting down when you see the price. Moss 371-100, TRF SUAUC4490
 
Aloha Yvan,

I recently fabricated a vacuum line for my TR3. I used 1/8 inch compression nuts and olives and 1/8 inch copper tubing. The thread size for the compression nut is 5/16 - 24 UNF. The nuts went on the carburetor and vacuum advance without a problem.
 
Back
Top