• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A TR3A Roll Bar

Share this page

D

DrTonyC

Freshman Member
Offline
I've searched & failed to find a safety roll bar for my 1961 Triumph TR3A. Can anyone advise where I could find one? Cheers Tony C
 
tsimportedautomotive.com sells both SCCA approved and street bars made by Kirk Racing https://www.kirkracing.com/contacts.htm in Alabama. That's what I have in my 3A.

dscn0809.jpg
 
Peter- That's nice 3rd brake light you have mounted on the roll bar. I have a similar setup, but the light itself is a cheapo from Autozone. Where did you get that one? Is it LED??
 
Thanks - It's LED and also a cheapo universal light. It has a plastic housing so I cut out the sides to match the rollbar tube size and used a piece of black gararage door seal - the foam at the bottom of the door - and made a gasket.

The wire gooes inside the bar and out the pass rear leg. It's hooked up to a motorcycle flasher/stop light modulator that flashes the roll bar light a few times when I hit the brakes to get peoples attention.
 
Back
Top