Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Anyone know what size this bolt is? I recently had both generator bracket mounting bolts fall out at some point.(not the ones that hold the bracket to the block). Generator still worked amazingly....held in place by the link adjustment bar!I think the recessed pedestal threads may be stipped out. I've found a spare pedestal I can use but any bolt that I put in dosn't seem to want to thread in? Karl
-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
TR2/3/3A TR3A generator to pedestal bolt?
- Thread starter karls59tr
- Start date
Share this page
martx-5
Yoda
Offline
The TR3 Spare Parts Catalogue lists the part number as 59115, which would seem to indicate that it is not a normal size. TRF lists that part as "use 51K1774"...again, it doesn't sound like a common bolt size. Since the lock washer is 5/16", my best guess would be British Standard Fine, which is 5/16"-22 with a 55 deg thread profile. Normal 5/16" bolts have either 18 or 24 tpi.
You may have to buy one from the Roadster Factory for $2.85... :eeek:
You may have to buy one from the Roadster Factory for $2.85... :eeek:
