• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR2/3/3A TR3A Fuel Sending Unit

Share this page

Geo Hahn

Geo Hahn

Yoda
Country flag
Offline
On a pre-60000 TR3A can you R&R the fuel tank sending unit without moving or removing the tank?

Obviously large parts of the rear interior will be out. Assume I have an assortment of offset screwdrivers, plenty of time and moderate patience. Thanks!
 
Yep - I've had mine out a couple of times to replace the gasket and to get the thing working properly. It's not that difficult from the front of the tank - I think only one of the screws posed a problem, but it's not that bad.

By the way, I've got a new sending unit that I didn't need, if anyone needs one.

Mickey
 
Back
Top