-
Hi Guest!
If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
TR2/3/3A TR3A Door Handle
- Thread starter tedwone
- Start date
Share this page
If I remember correctly, there is a cam lobe on the back of the barrel and that moves a bar in the back of the lock to lock. Often the bar becomes frozen in the locked position and the barrel cannot fall out. If the lock is unlocked and you drive the keep pin out of the side, the barrel should fall out. PJ took a couple apart for me and they were oxidized so much the lock was damaged beyond fixing.
steve
steve